1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
1 - 1
To be negotiated
High throughput Multi-cavity induction melting system for new generation alloys research
CY-50KTC-M is a temperature-controlled induction melting system with multi-cavity, which can melt and solidify multi-alloy rod of 5-8 mm diameter at different composition up to 2000°C It is an ideal tool for high throughput material genome research to search new generation alloy.
Working Voltage: 220V, 50/ 60Hz, Three Phase
Working Current: 5~52 Amps (60A breaker required)
Max. Input Power: 15 KW
Output Frequency: 30 - 80 kHz
Duty Cycle: 80%
Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H)
Air Cooling: Rear Fan
Protection: Automatic water pressure, over-temperature, and overpower protection
Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder and cover
Temp. Controller & Thermocouple
Precision digital temperature controller with Automatic PID tunning
30 segments programmable for controlling heating and cooling rate as well as dwell time.
Overheating & thermocouple failure protection.
+/- 3 ºC temperature accuracy.
Thermocouple: B type ( 1/4"x10"L )
Continuous Working Temp. Range: 1000ºC~2000ºC
Max. Heating Rate:
Graphite Crucible & Refractory liners
High Purity Graphite Crucible: 2" OD x 1.57"ID x 4" Depth (4.3'' Height) Crucible with multi-cavity is included for induction metal melting. ( please see the picture and select cavity diameter 6 or 8 mm before the order )
6 mm dia. Cavity: 16
8 mm dia. Cavity: 12
Three-layer special design refractory liner can withstand temperature up to 2000°C.
Sealing Flanges & Quartz Chamber
Two-end Open Quartz Tube is included with dimensions of 130mm(OD) x 122mm(ID) x 360mm(L)
Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve and bard fitting.
Bottom Flange: Stainless steel flange with needle valve and KF-25 vacuum port.
KF25 right angle valve& clamps and 1000mm long SS bellows are included for connecting to vacuum pum
One 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.
Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPT
Temperature range: 5 - 30°C
Water Flow Rate: > 16 L/m,
Water pressure: 40PSI
Note: It is recommended to use specific coolant to get the best performance.
One 156L/m Rotary Vane Vacuum Pump is included
Rate: 156 L/min up to 10e-2 torr vacuum.
Max. Power Consumption: 0.4KW / 0.37KW
For US customer, 110V Vacuum pump will be included
If you choose high-speed turbo-pump, vacuum level can reach 10- 6 torr
Heavy Duty Mobile Cart
Structure: Steel Frame Mobile Cart
600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange
For Non-UL Certified version, a protective shield made of phenolic sheets will be provided.
For UL Certified version, a clear protective shield made of polycarbonate will be provided.
The protective shield is to be placed around the quartz tube for safe operation
Induction Heater: 18.5"(L) x 12"(W) x 17"(H) (520mm x 520mm x 450mm)
Water Chiller: 18"(L) x 18.7"(W) x 30"(H) (460mm x 475mm x 762mm)
Heavy Duty Mobile Cart: 600mm(L) x 800mm(W) x 597mm(H)
One year limited warranty with lifetime support
Consumable parts such as processing tube, refractory liners, o-rings, and heating coil are not covered by the warranty
Attention: Protective inert gas must be continuously filled throughout the experiment in order to protect the graphite crucible and C thermocouple. The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min)
The Induction melting system is designed for use under vacuum and low pressure < 0.02 MPa
Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation.
Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heat process
Shipping Weight & Dimension
#1: 410 lbs, 48"x40"x65"
#2: 355 lbs, 48"x40"x48"
Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.
We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.
Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.
Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.
Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.
Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.