Plastic paper inside,polyfoam filled,wooden box outside
Port
Zhengzhou,Beijing,etc.
Picture Example:
Lead Time
:
Quantity(Sets)
1 - 1
>1
Est. Time(days)
10
To be negotiated
Online Customization
Sliding Rapid Thermal Process RTP tube furnace for fast heating and cooling
Product Description
Introduction of RTP tube furnace
CY-OTF-1200X-80SL is a slide-able tube furnace with 3"IDx55" L quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on bottom of furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating, the furnace may be pre-heated to a desired temperature and then be slided to the sample's position. As for fastest cooling, the furnace can be slided to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.
Size: OD: 3.2" x ID: 3.0" x Length: 55" (inch) or OD: 80 x ID 75 x Length 1400 ( mm)
Two foam ceramic blocks are included which must be placed inside tube to avoid heat
radiation damaging O-ring
Temperature
Controller
PID automatic control with 30 programmable segments for precise control of heating rate,
cooling rate and dwell time.
Built-in over temperature alarm and protection allows for operation without attendant.
Two K type thermal couples are included. One is bilt in furnace to control furnace
temperature, and another inserted into tube to monitor sample real temperature profile.
One NIST certified thermometer is included to connect to the thermal couple inside tube.
the meter has RS232 Interface with Windows Software which can record temperature
profile by PC.
Temperature
Accuracy
+/ - 1°C
Vacuum Flanges
Stainless steel vacuum flanges are installed on both ends of tube with heavy duty support.
Right flange: KF-25 pump connector and needle valve.
Left flange: one needle valve and 1/4" thermocouple feed-through and digital vacuum gauge.
An 24" length x 1/4" dia. K type thermocouple (included) connected to an Omega temperature
calibrator (included) will be inserted through this flange to monitor the heating and cooling
rates of the sample's position during furnace sliding.
Vacuum Level
10E-5 torr can be reached by molecular pump
10E-2 torr by mechanical pump.
Sliding Rails / Table
Double sliding rail made by Cr plated steel
Sliding length: 1200 mm
Dimensions
550 x 380 x 520 mm ( furnace only)
1500 x 380 x 620 mm ( furnace + sliding )
Warranty
One year limited manufacturer's warranty
Compliance
CE Certified
Heating temperature curve of RTP tube furnace
Vacuum flanges of RTP tube furnace
K Thermocouple of RTP tube furnace
online service
Company Introduction
Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.
We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.
Package
FAQ
Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.
Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.
Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.
Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.