CY-1200X-55 is a split tube furnace with CE certified electrical components. Ni based super-alloy tube (55mm O.D x 20 mm I.D x 600 mm L) and flanges/valves. It is designed for using at high pressure (7 MPa) up to 1100°C under oxidizing and inert gas atmosphere to process special compound. It is a ideal furnace to use for preparing new materials under high pressure, and also can be use as mini HIPto treat metallic sample.
· Double layer steel casing with air cooling.
· High purity fibrous alumina insulation for max. energy saving.
· Aluminum heat sink on processing tube to ensure pressure flange and fitting < 80°C
· The optional torque wrench is available here to avoid overtightening the flange bolts.The suitable tightening torque for 55 ODx 20 ID x 580 L (mm) is the 40-foot pound.
Compatible Gas and Crucible
· O2 and inert gasses such as N2, Ar and He
· Note: A small quartz or Alumina boat shall be used to load the sample inside the vessel. Please click the link in below to order separately. Never place the sample directly onto the vessel without a crucible. Vessel service-life could be reduced significantly if you don't do so.
· MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
· Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
· Over temperature protection and alarm allows for operation without attendant(s).
· +/- 1 ºC temperature accuracy.
· One Super-alloy flange is included.
· One Aluminum heat radiators are installed in front of flange to keep flange below 100oC
· High-temperature pressure transmitter, One solenoid valve(Max.15Mpa) is pre-installed.
· The safety pressure relief valve is available to be installed at the downstream side.
Pressure Sensor and Display
· Precision high pressure sensor (Pressure measurement range: 0~25Mpa) installed on pressure vessel.
· The pressure sensor is installed in the flange. The pressure will be displayed in the pressure controller in the front panel of the furnace.
· The alarm system is built in the pressure controller which allow the user to set up the high and low limit point of pressure. When the measuring pressure exceeds limit point, the alarm strobe and whistle will be activated for the warning.
· When the pressure reaches the alarm set point (Max.15Mpa), the pressure inside the vessel will be released via the solenoid valve installed on the flange. For Max.pressure >15 Mpa, please shut off the manual needle valve nearby the solenoid valve
· You may order four Pt wire ( 0.35 mm dia ) feedthrough to install the furnace for measure material electric conductivity under high pressure upto 1100oC at extra cost.
· 10 mm Sapphire window can be installed on th flange for Ramman beam under high pressure at extra cost
· To measure the electric properties of thermoelectric ceramics under high pressure & temperature conditions, please order alumina testing fixture and high pressure electrical feedthrough (10Mpa Max.) with the furnace (additional fee will apply).
Fe-Cr-Al Alloy doped by Mo
550 x 380 x 520mm
Shipping package Dimensions
Picture of furnace for lab
Packaging & Shipping
Packaging of furnace for lab
PLY wood box as below picture, or as customer request.
Shipping of furnace for lab
As customer request. Generally, Our mode of transport are as by sea, by air or rail transport
T/T, L/C, WEST UNION, PAYPAL, ESCROW AND ETC
Main product is 15 month, except wearing parts.
Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design, manufacturing and sales of equipment used in scientific researches. Independence and innovation is the company's tenet.