plastic paper indide,polyfoam filled,woolen case outside
1 - 1
To be negotiated
High temperature 1650C hydrogen atmosphere box furnace with 8L heated chamber
CY-1700X-H2 is a box furnace designed for material synthesis under dry hydrogen up to 1650 ºC. The furnace consists of high-quality alumina fiber bricks and Mo alloy heating elements with a heating chamber of 8"x 8"x8", as well as a vacuum-sealed steel case with water cooling jacket and automatic H2 burning system. It is an ideal tool for preparing new materials which require reducing atmosphere, such as phosphorous and Ti alloy.
Technical parmaters of Hydrogen Atmosphere Box Furnace
Double-layer stainless steel structure for maximum vacuum and safety.
Water cooling front door and air cooling shell
Built-in pressure gauge, vacuum valves, and two gas float meters
Built-in H2 burning control system --- if the controller detects no flame in the burner, the gas delivery valve will be shut down automatically
Inside Chamber Size
Heated chamber: 200x 200x 200 mm (8x8x8 inch), 8 Liter
Energy saving 1800 grade fibrous alumina insulation
High purity Al2O3 coating
AC 208 - 240V single phase (50/ 60 Hz)
30 Amp (50 Amp air breaker is required)
Continuous 1600°C Max. 1650°C(<60min)
5°C / min
two B type thermocouples (control thermocouple and secondary alarm thermocouple)
Main Temperature Controller is used to set and run the 30-segment heating program and provides the 1-level temperature alarm protection. Secondary Temperature Controller reads the temperature from the secondary B type thermocouple, monitors the temperature during all process and provides the 2-level temperature alarm protection.
The pressure sensor and pressure controller are installed. It reads the chamber pressure and controls the inlet and outlet gas valves respectively according to the pressure limit settings.
The pressure control can be used to perform the following functions:
High and Low-pressure protection
The pressure controllable range: -0.06 to 0.03Mpa.
6 sets of Mo coils heating elements are built-in and replaceable
The heating element of Mo coil is consumable parts which should be ordered separately if extra is required.
The heating element can be replaced by MsSi2 to run furnace under oxygen and air up to 1700°C.
Warning: Mo heating element cannot be used under air or oxygen at the temperature > 300°C
One temperature controller is included.
Proportional–integral–derivative control (PID control) and auto-tune function
30 segments programmed with ramping, cooling and dwelling steps
Built-in over-temperature alarm and thermocouple failure alarm
+/- 1℃ temperature control accuracy
Default DB9 PC communication port
Gas Flow Control and Vacuum Valve
Two large flow meters (N2: 0~3.5L/min, H2: 0~3.5L/min) are installed on the front panel of the furnace.
One for purging Inert gas prior to introducing H2 gas
One for controlling H2 gas flow
One heavy-duty vacuum pump ( CE certified ) built-in bottom furnace. You may choose a UL certified pump at extra cost
H2 Gas Burning Control System and Option Hydrogen detector
An ignition device already installed to incinerate flowing gas and detect burner temperature to ensure H2 burner is in working condition. If H2 does not burn properly, the controller will shut down the H2 gas delivery valve immediately.
Warning: You must install a certified Hydrogen detector in operation facility to alarm hydrogen leaking b accident.
A 58L/min recirculating water chiller is installed for cooling furnace sealing flange.
1200mmL×850mmW×1520mmH (without burner) and 2020 H(with burner )
One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty.)
Pictures show of Hydrogen Atmosphere Box Furnace
Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.
We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.
Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.
Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.
Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.
Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.