Plastic paper inside,polyfoam filled,wooden box outside
1 - 1
To be negotiated
20mA Electrostatic electre power supply for Static electricity of melt blown cloth
CYKY-TD2202 is a special high-voltage power supply for electrostatic electret equipment in the melt-blown nonwoven industry. Adopt digital control mode, full abnormal slow start, nanosecond arc-response ability to ensure the melt-blown production line is fault-free and long-term operation The high stability can make the ionization effect more stable. The customer feedback of the TD2202 series high voltage power supply equipment can reach the BFE99 standard.
Features of High voltage power supply:
Optional output voltage 60kV / 100kV (other voltages can be customized)
Output current 20mA
One-key operation function
High-speed mode / abnormal self-judgment / parameter self-test function
No melting hole mode
RS-485 isolated digital communication
Safety interlock function
Typical application of High voltage power supply:
Melt blown non-woven fabric with static electricity;Electrostatic separation;Electrostatic elimination
60kV or 100kV optional, positive or negative optional
Front panel of power supply: the power supply has its own rotary encoder, which can set the output voltage / current from 0 to the rated value.
External analog control: An external 0 to 10V control signal can set the output from 0 to rated value.
Digital communication control: the output can be set from 0 to rated value according to standard communication protocol through RS-485 communication interface.
In one-key operation mode, the power supply will work with relatively good voltage and current. At this time, the operating parameters are not fixed and will automatically change with the environment. If the effect is not good, you can cancel this function and use manual mode to manually adjust the voltage and current
The power supply has enabled this mode by default. In this mode, the power supply will work at the fastest exception handling speed to avoid the exception handling that is too slow and leads to an increase in product defect rate.
No-melt mode (under development
Press and hold to light up to start the non-melting hole mode. This mode will make the power supply work in an intelligent judgment state, which can avoid some ignition situations.
Abnormal self judgment
Intelligent exception judgment processing, in the case of such abnormalities as over-voltage, over-current, short circuit, arcing and overheating, will choose its own working mode.
Parameter self test
This function is suitable for the debugger to use this device for the first time. Long press this button until the voltage has no obvious fluctuation. Release this button, then the voltage and current at this time are the reference working parameters.
After half an hour of start-up, it is better than 0.05% every 8 hours.
10-90% without condensation.
Voltage and current indication
four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word.
It has basic protection functions such as overheating, overvoltage, overcurrent, short circuit, arc drawing, etc.
Other required protection functions can be customized.
The recessed plastic insulated conduit and the high-voltage cable penetrated are connected by a 16mm / 28mm diameter metal connector. The total length of standard high-voltage cable is 2m (other lengths can be customized).
60kV: 482mm wide, 133.5mm high and 320mm deep.
100kV: 482mm wide and 133.5mm high and 500mm deep.
20kg ~ 30kg
1. Factory prices with the best quality.
2. One year free-of-charge maintenance for all the dental equipment
3. Customized service for special demand
4. Fast and flexible delivery, by sea, by air, by express
5. Quick response within 24 hours
How to order
1. If you are interested in our products, please tell us the model number and quantity.
2. We will make a proforma invoice for your order.
3. We will deliver the product ASAP on receipt of the payment
1. Guarantee for one year after shipment.
1. Western Union
3. Secure Payment through Alibaba
4. Telegraphic transfer
Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design,
manufacturing and sales of equipment used in scientific researches. Independence and innovation is the